Make a 10by 15cm (4by 6inch) borderless copy of a
photo
For the best quality when copying a photo, load photo paper in the input tray and
change your copy settings for the correct paper type and photo enhancement. You
might also want to use the photo print cartridge for superior print quality. With the tri-
User Guide
59
Use
the
copy
features
color and photo print cartridges installed, you have a six-ink system. See
Use a photo
print cartridge
for more information.
Warning
In order to make a borderless copy, you must have photo paper (or
other specialty paper) loaded. If the HP all-in-one detects plain paper in the
input tray, it will not make a borderless copy. Instead, your copy will have
borders.
1
Load 10 by 15 cm (4 by 6 inch) photo paper in the input tray.
Note
If your HP all-in-one has more than one input tray, you might need to select
the correct input tray. See
Select an input tray for copying
for more
information.
2
Load your original photo face down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front
edge of the glass.
3
Press
Start Copy Color
.
The HP all-in-one makes a 10 by 15 cm (4 by 6 inch) borderless copy of your
original photo, as shown below.
Tip
If the output is not borderless, then set the paper size to
5x7 Borderless
or
4x6 Borderless
, set the paper type to
Photo Paper
, set the
Photo
enhancement, and then try again.
For more information on setting the paper size, see
Set the copy paper size
.
For information on setting the paper type, see
Set the copy paper type
.
For information on setting the
Photo
enhancement, see
Enhance light areas
of your copy
.